Your advantages at a glance
- Simple measurement of energy data
- The right energy meter for every application
- Three interfaces to choose from
- Every model is MID certified
Your advantages at a glance
- Simple measurement of energy data
- The right energy meter for every application
- Three interfaces to choose from
- Every model is MID certified
Energy / electricity meters and accessories
We offer the right energy meter for every application:
- Indirectly measuring meters record the currents via current transformers and are used when the maximum currents exceed 80A. All three phases are measured.
- With direct measuring meters, the currents are measured directly, i.e. no additional current transformers are required, but the maximum currents must not exceed 80A. Depending on the model, the measurement is single-phase or three-phase.
- The meters are supplied with a pulse, Modbus or M-Bus interface, depending on the model.
- With current transformers and voltage tap-off terminals, we make it easy for you to measure energy data.
Product overview
Electronically indirect measuring 1-phase energy meter, optionally with pulse interface, MID certified.
- Measurement of all variables relevant for checking a power grid: Energies, V, I, PF, F, Q
- Measurement of alternating current L-N 230V AC via direct connection up to 80A
- Top-hat rail mounting and sealable terminal cover
- Tariff 1 and 2
- Accuracy class B / 1 for active energy / active power
- Each model is MID certified
Further technical information can be found under the link to ausschreiben.de or in the Download Center.
Electronically indirect measuring 3-phase energy meter, optionally with pulse, Modbus or M-Bus interface. Each model is MID certified.
- Measurement of all variables relevant for checking a power grid: Energies, V, I, PF, F, P, Q
- Measurement of 3-phase systems with a voltage of L-N 230V AC / L-L 400V AC
- Measurement of currents via 1 or 5A current transformers
- Top-hat rail mounting and sealable terminal cover
- Tariff 1 and 2
- Accuracy class B / 1 for active energy / active power
- Each model is MID certified
Further technical information can be found under the link to ausschreiben.de or in the Download Center.
Electronic direct measuring 3-phase energy meter, optionally with pulse, Modbus, M-Bus or Modbus TCP-IP interface. Each model is MID certified.
- Measurement of all variables relevant for checking a power grid: Energies, V, I, PF, F, P, Q
- Measurement of 3-phase systems with a voltage of L-N 230V AC / L-L 400V AC
- Measurement of currents via direct connection up to 80A
- Top-hat rail mounting and sealable terminal cover
- Tariff 1 and 2
- Accuracy class B / 1 for active energy / active power
- Each model is MID certified
Further technical information can be found under the link to ausschreiben.de or in the Download Center.
LAN-TCP/IP communication module for expanding single-phase and three-phase econ energy meters. For side mounting to transfer measurement data via a TCP/IP network to a remote system such as the econ4 energy management software.
- LEDs for connection activity, status, side IrDA interface, and error status
- Transmission of energy, power, V, I, PF, F
- Dimensions W x H x D: 18 (1TE) x 90 x 70 mm
- Top-hat rail mounting
- Standard rail 35 mm according to EN 60715
Item number: EC251222
LoRaWAN communication module for expanding single-phase and three-phase econ energy meters. For side mounting to transmit measurement data via a wireless LoRaWAN to a remote system such as the econ4 energy management software.
- Transmission of active and reactive energy consumed/supplied for 2 tariffs
- Data rate: 250...5470 bits/sec.
- Frequency band: 863...870 MHz
- Dimensions W x H x D: 18(1TE) x 90 x 70mm
- Top-hat rail mounting Standard rail 35mm according to EN 60715
(Antenna not included)
Item number: EC251238
- 2.5 m - 3 m cable length
- SMA plug
- Magnetic base antenna
Item number: EC251264
Download Center
Here you will find our brochures, manuals, data sheets, etc. ready for you to download.
To the Download Center
